Vertical cantilever type - TNP Series

Dryrun-proof TNP series vertical cantilever pumps are the solution of choice whenever it comes to pumping solids-laden acids, alkalies or chemically contaminated effluents or when there is a risk of prolonged dry running. 

Material of construction: PP, PVDF & PE-UHMW

Setting Depth 
Standard setting depths 600 mm and 800 mm Suction pipe up to a length of 1600 mm.

Application and Duties

1. Vertical centrifugal pump with volute casing and single- entry, single-stage radial impeller; without bottom bearing; the shaft bearing is located outside the path of the fluid pumped. 

2. Impeller is positively locked to the shaft for reverse 
rotation protection. 

3. Circular or rectangular sole plate; special sole plate geom­etries and sole plates with supporting flange available on request. 

  • Capacity (Q): up to 200 m3/hr
  • Head (H): up to 60 m
  • Opt. temperature: -30 to 125 °C
  • Opt. pressure (p): up to 6 bar
  • Discharge size: DN 25 to DN 65

Technical Aspects


My job is to help professionals to achieve their industrial goals whilst having adequate protection along the way.